LattisNet(R) System 3000 Concentrators Highlights * Multiple bus architecture allows integration of five Ethernet, two Token Ring and three FDDI networks into a single platform * Modular design, along with a wide choice of modules, enables the Mel 3000 to be customized to meet specific networking needs * Support for integrated Ethernet switching, bridging and routing eliminates need for external equipment * Media flexibility provides support for unshielded twisted pair, shielded twisted pair, coaxial and fiber optic Ethernet, shielded twisted pair and unshielded twisted pair Token Ring, and shielded twisted pair and fiber optic FDDI from a single platform * Supports full IEEE 802.3 Ethernet repeater functionality, enabling support for greater distances and intercommunication between multiple media types * Supports full IEEE 802.5 Token Ring ring-in/ring-out and repeater capabilities to create large single rings without bridging or routing * Implements full ANSI FDDI standard over three 100 Mb/s paths (primary, secondary and local) * Optional SynOptics management capabilities deliver network topology, per-port control and monitoring of detailed status, performance and diagnostic information through an object- oriented graphical user interface The LattisNet System 3000 family of concentrators deliver a flexible platform for implementing and supporting a variety of large, complex physical star-topology networks over a building's structured cabling system. System 3000 concentrators feature a multiple-bus backplane architecture which enables them to simultaneously support a combination of 10 megabit per second (Mb/s) Ethernet, 4 Mb/s and 16 Mb/s Token Ring, and 100 Mb/s Fiber Distributed Data Interface (FDDI) networks. Through a variety Ethernet, Token Ring and FDDI connectivity, internetworking and network management modules, network designers can create custom configurations that meet their specific networking needs. Model 3000 Premises Concentrator The Model 3000 Premises Concentrator is designed for large, high- density network environments, where it supports multiple independent network segments operating over structured cabling configured in an active-star topology. Fully utilized, a single Model 3000 can simultaneously support five independent Ethernet segments, two Token Ring networks and three FDDI paths, delivering maximum flexibility for a wide variety of network topologies. The Model 3000 chassis offers 12 slots to hold any combination of System 3000 modules supporting IEEE 802.3-compatible Ethernet over unshielded twisted pair wire, shielded twisted pair wire, fiber optic cable or thin coaxial cable; IEEE 802.5-compatible Token Ring over unshielded or shielded twisted pair wire; and American National Standards Institute (ANSI) X3T9.5 FDDI over fiber optic cable and shielded twisted pair wire. When configured in an Ethernet network with a retiming or network management module, the concentrator provides full IEEE 802.3 repeater functionality. The concentrator can also accommodate LattisNet(R) Ethernet Switching Engines(tm) as well as local and remote bridges and routers, delivering integrated internetworking solutions from a single platform. The Model 3000 also supports Sycs' LattisNet Manager(tm) for DOS and the UNIX-based Optivity(tm) network management systems. When configured with System 3000 Ethernet, Token Ring and/or FDDI network management modules, the concentrator's dedicated network management interface bus ps the management system with concentrator-, module- and port- level monitoring and control capabilities. The Model 3000 can be installed in two mounting arrangements: on a table top and in an EIA- standard 19-inch equipment rack, occupying 11 rack- mounting units. Four different versions of the concentrator are available. Multi-segment Ethernet The Model 3000N Premises Concentrator includes a chassis, a front- accessible modular fan tray, a front-accessible Model 3002 460-watt Power Supply, and a backplane bus capable of supporting up to five independent, manageable Ethernet segments. The backplane also includes a dedicated network management interface bus and a power supply bus. Multiple Ethernet/Token Ring Networks The Model 3000NT Premises Concentrator is identical to the Model 3000N, with the addition of two Token Ring buses on the concentrator backplane. The Token Ring buses support two independent, manageable Token Rings, each of which can operate at either 4 Mb/s or 16 Mb/s. The Model 3000NT can support up to seven separate networks - five Ethernet and two Token Ring - simultaneously. Ethernet, Token Ring and FDDI The Model 3000S Premises Concentrator is identical to the Model 3000NT, with the addition of an FDDI bus configured to support up to three separate ring paths - primary, secondary or local - running at 100 Mb/s. The Model 3000S can be configured to simultaneously support any combination of Ethernet, Token Ring and FDDI networks from a single platform. The networks can operate independently, or they can be logically connected via external bridges or routers to create a large, integrated Ethernet/Token Ring/FDDI system. Redundant Power Supplies The Model 3000 Premises Concentrator can also be configured with optional redundant power supplies. The Model 3000SR is identical to the Model 3000S, with the addition of a redundant 460-watt power supply system designed around the Model 3100R Summing Module and two Model 3002 power supplies. The Model 3100R Summing Module resides in a designated slot between the power supplies, where it manages power sharing within the concentrator. This load-sharing capability enables both power supplies to provide current to the concentrator simultaneously. In the event one power supply should fail, power is automatically shifted to the functioning source for uninterrupted service. Both power supplies are individually capable of supporting a fully-configured System 3000 concentrator under worst-case circumstances. Model 3030 Department Concentrator The Model 3030 Department Concentrator is a four-slot version of the Model 3000, designed for medium-density departmental networks. Like the Model 3000, the Model 3030 accommodates any combination of System 3000 host, network management or internetworking modules supporting Ethernet and Token Ring. In networks configured with SynOptics' network management, the Model 3030's dedicated network management interface bus provides the management system with concentrator-, module- and port-level monitoring and control capabilities. When configured in an Ethernet network with a retiming or network management module, the concentrator provides full IEEE 802.3 repeater functionality. The Model 3030 offers several mounting arrangements. It includes brackets for installation in an EIA-standard 19-inch rack, where the Model 3030 occupies three rack-mounting units. The Model 3030 can also be wall- mounted with the appropriate brackets or set on a table top. Front panel LED status indicators on the Model 3030 report AC and DC power and fan failures to simplify troubleshooting and fault determination. The easily-removable back panel holds the power supply and fan, providing a single assembly for rapid replacement. Ethernet Only The Model 3030-01 includes a chassis, an easily-accessible power supply/fan unit, and a backplane with Ethernet, network management interface and power supply buses. Ethernet/Token Ring The Model 3030-04 is identical to the Model 3030-01 and includes two Token Ring buses on the concentrator backplane. The Token Ring buses support two independent Token Rings, each of which can operate at either 4 Mb/s or 16 Mb/s. The Model 3030-04 can support three networks - one Ethernet and two Token Ring - simultaneously. System 3000 Concentrators Specifications Network Protocols Ethernet: 10 Mb/s Manchester encoded IEEE 802.3 Token Ring: 4 Mb/s or 16 Mb/s differential Manchester encoding IEEE 802.5 (Model 3000NT and Model 3000S) FDDI: 100 Mb/s with 4B/5B coding over three paths (primary, secondary and local) (Model 3000S) Standards Support IEEE AUI (for connections via 10BASE5) IEEE 802.3 10BASE-T IEEE 802.3 10BASE2 IEEE 802.3 FOIRL IEEE 802.5 Token Ring ANSI FDDI X3T9.5 FDDI ISO 9314-1 FDDI Physical Protocol (PHY) standard ISO 9314-3 FDDI Physical Medium Dependent (PMD) standard Physical Dimensions Model 3000 Concentrator: (H) 19.2 in x (W) 19 in x (D) 12 in (includes rack mount flanges) (H) 48.8 cm x (W) 48.3 cm x (D) 30.5 cm (includes rack mount flanges) Model 3030 Concentrator: (H) 5.2 in x (W) 19 in x (D) 15 in (H) 13.2 cm x (W) 48.3 cm x (D) 38.1 cm Environmental Specifications Operating temperature: 5*C to 40*C Operating humidity: 85% max relative humidity, non-condensing Operating altitude: 10,000 ft (3,048 m) Storage temperature: -25*C to 70*C Storage humidity: 95% max relative humidity, non-condensing Free fall/drop: ISO 4180-2, NSTA 1A Vibration: IEC 68-2-6/34 Stock/bump: IEC 68-2-27/29 Thermal rating: Model 3000: 460 watts (1,600 Btu/hr) max (fully loaded); 62 watts (210 Btu/hr) min (empty) Model 3030: 150 watts (510 Btu/hr) max (fully loaded); 15 watts (50 Btu/hr) min (empty) Weight Model 3000: Chassis assembly, without power supply: 33.3 lbs (15 kg) Power supply: 10.2 lbs (4.6 kg) Fully loaded (approximate): 75 lbs (34 kg) Shipping weight (approximate): 60 lbs (27 kg) Model 3030: Chassis: 17.7 lbs (8 kg) Fully loaded (approximate): 28 lbs (13 kg) Shipping weight (approximate): 30 lbs (14 kg) Safety UL listed (UL 1950) CSA certified (CSA 22.2 #950) TUV licensed (EN 60 950) Electromagnetic Emissions Meets FCC Part 15, Subpart B, Class A Meets EN 55 022 (CISPR 22: 1985), Class A or B Meets General License VDE 0871, Class B (AmtsblVfg 243/1991, 46/1992) Meets VCCI Class 1 ITE (Refer to individual reference sheets for additional information) Electromagnetic Susceptibility Electrostatic discharge (ESD): IEC 801-2, Level 2/4 Radiated electromagnetic field: IEC 801-2, Level 2 Electrical fast transient/burst: IEC 801-4, Level 2/3 Electrical surge: IEC 801-5, Level 1/3 (Refer to individual reference sheets for additional information) Model 3002 Power Supply Specifications Features Slide mounted modular power supply AC cable supplied for standard U.S. outlets AC power-on lighted switch and DC power-good LED AC input voltage selection on front panel Protection: * Overvoltage protected outputs * Short circuit protection on outputs * Thermal shutdown on overheating Physical Dimensions (H) 15 in x (W) 2.4 in x (D) 10.6 in (H) 38 cm x (W) 6.2 cm x (D) 26.9 cm Weight 10.2 lbs (4.6 kg) Input Connector Meets IEC and CEE-22 specifications Safety UL Recognized, CSA Certified, TUV Licensed UL listed (UL 1950) CSA certified (CSA 22.2 #950) TUV licensed (EN 60 950) Electromagnetic Emissions Meets FCC Part 15, Subpart B, Class A Meets EN 55 022 (CISPR 22: 1985), Class A or B Meets General License VDE 0871, Class B (AmtsblVfg 243/1991, 46/1992) Meets VCCI Class 1 ITE (Refer to individual reference sheets for additional information) Electromagnetic Susceptibility Electrostatic discharge (ESD): IEC 801-2, Level 2/4 Radiated electromagnetic field: IEC 801-2, Level 2 Electrical fast transient/burst: IEC 801-4, Level 2/3 Electrical surge: IEC 801-5, Level 1/3 (Refer to individual reference sheets for additional information) AC Characteristics AC line frequency: 47-63 Hz VAC input requirement: 90-132 VAC (110 VAC operation); 180-265 VAC (220 VAC operation) AC volt amperes rating: 1,200 VA max Current rating: 8 amps (110 VAC operation); 4.2 amps (220 VAC operation) Model 3100R Summing Module Specifications (for Model 3000SR Redundant Power Supply System) Electrical Specifications Power consumption: 25W (+5V), 7W (+12V) Thermal rating: 109 Btu/hr maximum Physical Dimensions (H) 15 in x (W) 1.2 in x (D) 10.6 in (H) 38 cm x (W) 3.1 cm x (D) 26.9 cm Weight 3 lbs (1.4 kg) Environmental Specifications Operating temperature: 5*C to 40*C Operating humidity: 85% max relative humidity, non-condensing Operating altitude: 10,000 ft (3,048 m) Storage temperature: -25*C to 70*C Storage humidity: 95% max relative humidity, non-condensing Free fall/drop: ISO 4180-2, NSTA 1A Vibration: IEC 68-2-6/34 Stock/bump: IEC 68-2-27/29 Electromagnetic Emissions Meets FCC Part 15, Subpart B, Class A Meets EN 55 022 (CISPR 22: 1985), Class A or B Meets General License VDE 0871, Class B (AmtsblVfg 243/1991, 46/1992) Meets VCCI Class 1 ITE (Refer to individual reference sheets for additional information) Electromagnetic Susceptibility Electrostatic discharge (ESD): IEC 801-2, Level 2/4 Radiated electromagnetic field: IEC 801-2, Level 2 Electrical fast transient/burst: IEC 801-4, Level 2/3 Electrical surge: IEC 801-5, Level 1/3 (Refer to individual reference sheets for additional information) Model 3030 Power Supply Specifications Power Supply Characteristics AC cable supplied for standard U.S. outlets AC power-on lighted switch and DC power-good LED Protection: * Overvoltage protected outputs * Short circuit protection on outputs Input Connector Meets IEC and CEE-22 specifications AC Characteristics AC line frequency: 47-63 Hz VAC input requirement: 90-250 VAC AC volt amperes rating: 300 VA max Current rating: 3.0 amps nominal at 110 volts; 1.5 amps nominal at 220 volts Corporate Headquarters SynOptics Communications, Inc. 4401 Great America Parkway Santa Clara, CA 95054 Phone: (408) 988-2400 Fax: (408) 988-5525 System 3000, LattisNet Manager, Optivity and Expanded View are trademarks and LattisNet and SynOptics Communications are registered trademarks of SynOptics Communications, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. P/N DA505-200US-C